| ej1.xls |
A road test comparison in Excel format |
From John Walker |
| harness.doc |
A wiring harness connection and routing list in MS Word 6.0
format |
From Paul Baker |
| hitachi.pdf |
A comprehensive documentation of using a common Hitachi
alternator in a 4.2 series 1 e-type. |
From Ray Livingston |
| radiator.pdf |
A document detailing installing an aluminum radiator.
|
From Ray Livingston |
| wildwood.pdf |
A document detailing installing an Wildwood Brakes.
|
From Ray Livingston |
| subframe.pdf |
A comprehensive drawing of the front subframe assembly
including bolt locations and sizes in Adobe Acrobat format |
From Steve Kemp |
| cover.pdf |
An adaptation of an MG cockpit cover for an OTS |
From Ray Sharp |
| chainten.pdf |
Drawing to make a simple cam chain tensioning tool |
From John Walker |
| fasteners.pdf |
A nut, bolt, and fastener information file in pdf format |
From Richard Liggitt |
| etypedat.xls |
A spreadsheet documenting various members cars with
build, serial and other data in Excel format. |
From John Walker |
| etypedat.wk3 |
Same information as above in Lotus123 format (older version). |
From Les Halls |
| etypedat.wk4 |
Same information as above in Lotus123 format (newer version). |
From Les Halls |
| xkebuild.xls |
A spreadsheet documenting build information of 1961 - 1962
e-types in Excel format. |
From Bryan Allen |
| Holes.htm |
A set of pictures showing where you can inject rustproofing
into your e-type |
From Dan Mooney |
| jfbrkt.jpg |
A drawing showing where all the little brackets go that hold
the shields on the subframes. Courtesy John Farrell Auto Parts. |
From George Cohn |
| xketirec.xls |
E-type tire & differential conversion spreadsheet. |
From Raymond Sharp |